Shandong Weifang Shelves mobile intensive counter-intensive disassembly works a cabinet, mobile intensive counter: intensive counter can be single or multiple columns together walking on the rails, each column has a parking brake system (self-locking handle). Self-locking handle in the OFF position, the frame body can not move, Qingdao Shelves in the ON position, the movable frame body, the side panel of each column label box frame body with anti-down device works on a mobile column at the end of each before and after the combination of each box is equipped with a column total lock for locking the whole, played the role of confidentiality, limit device attached to the end of the rail. 2, Shandong disassembly Shelves archives Access: shake the handle clockwise or counterclockwise, the movable frame to steady walking on the track, the second frame body adjacent stall when moving away from a certain location (there is sufficient information on the location of access ), clockwise self-locking two columns frame body handle to the OFF position, then re-shake the handle, the second frame body can no longer move, Qingdao Shelves between the frame body and then enter the access data (not locked as rotating self-locking handle frame body, can slightly turn the hand wheel to be able to pull self-locking handle can not be forcibly locked, so as to avoid self-locking pull handle broken or damaged self-locking device). 3, intensive cabinet lock: Turn the self-locking handle to the ON position, the frame body self-locking is released. Shake the handle frame body can walk. When all the frame body with fixed columns close together can not be moved again, turn the handle side of the column so that the self-locking self-locking side column, then clockwise total lock, then all intensive cabinet locks. 4, Shandong disassembly Shelves adjust storey: intensive counter each standard height configuration. Qingdao mobile first remove the need to adjust the time when intensive counter-storey laminates, laminates will move up two sides of the support plate, and make the column decoupling, then up or down to the desired height, insert the column and the column hang hole and then you can put shelves.